Fixing the gauge of materials

See an example below:

Note the image above and learn how to apply the fixes gauge correctly.

The measures in black are nominal measures and measures in red are the real, the system does this compensation automatically from the register is correct.

In the registration of a part there is the possibility of the consideration shown above, you define how many times to discount the gauge, eg based discounting the 2 sides because it is between two sides, now the side is deducted only (1 time) the gauge of top, and the top that does not need to discount because of its position.

The gauge difference measurement will be applied when generating the file cuts and CNC, the register will be displayed only the sides that will be discounted, remember that the measure will be specified only for cutting and machining (CNC).

Here the recommendation is the measurement (measured with calipers) of material prior to generation of cutting and machining, so we will have the royal courts and machining operations, if there is the same material with different ex gauge: 15.3, 15.4, 15.5 choose one of these (eg: 15.4) and separate this material for everything that needs clearing and use other yardsticks for items that do not have compensation as eg tamponade, doors, and other trimmings.

This field is scheduled to make a decrement in the measure (eg 1000 - 0.4), but if you need to increase the value (eg: 1000 + 0.4) then use the negative and the system will reverse its decrement function to increase.

See how the registration works parts engineering.